GYMFORM ABS-A-ROUND PRO Manual De Instrucciones página 4

When putting on the belt, always remember:
• To place the large belt ONLY on your abdo-
men, obliques and lower back.
• To place the small belt ONLY on the areas
indicated below.
• Not to place the device on your neck, on your
chest or on your back in such a way that elec-
tricity passes through your heart (e.g. an elec-
trode on your chest and another on your back),
genitals, scars, moles, varicose veins or head).
• Not to place the belt on recent scars, inflamed
skin, infected areas or areas that are suscepti-
ble to acne, thrombosis or other vascular pro-
blems (e.g. varicose veins), or any part of your
body with limited sensitivity.
• Do not place on areas with injuries or limited
mobility (e.g. fractures or sprains).
• Not to place the belt directly on metal im-
plants. Place receivers on the closest muscle.
Possible Adverse Reactions:
There have been isolated reports of skin reac-
tions caused by the use of electro-stimulation
devices, including allergies, prolonged skin
redness and acne. If any of these symptoms
occur, switch off the device and consult your
doctor.
If you have never exercised before or have not
exercised for a long time, consult your general
practitioner.
Precautions:
-4-
• Do not use GYMFORM® ABS-A-ROUND
PRO if you are drowsy or asleep.
• Do not use GYMFORM® ABS-A-ROUND
PRO if your body is in contact with water.
• Keep out of reach of children.
• Do not use GYMFORM® ABS-A-ROUND
PRO in combination with any other device that
transmits electrical current to your body or with
any other machine.
• Do not connect the metal snap fasteners or
electrodes to any other object.
• Do not modify the device.
• Use only the electrodes supplied by Industex.
• Do not attach two electrodes together.
• If any of the electrodes is not attached pro-
perly, you will notice an itching sensation.
Note:
• The product may malfunction as a result of
electrostatic disturbances. If this occurs, sim-
ply press the RESET button (16) to resume
normal operation.
CONTENTS:
- 1 detachable GYMFORM® ABS-A-ROUND PRO unit
with 6 programmes.
- 1 GYMFORM® ABS-A-ROUND PRO belt.
- 1 special belt for working the leg and arm muscles
- 6 self-adhesive electrodes (2 of which are double elec-
trodes)
- 1 instruction manual.
- 1 table of fitness targets
- 1 sports bag
- 1 diet booklet
PRODUCT DESCRIPTION (Fig. 1):
1. GYMFORM® ABS-A-ROUND PRO unit.
2. Belt: front part - abdominals
3. Belt: back part - obliques
4. Belt: back part - lower back
5. Arm and leg belt
6. Buckles
7. Belt connector
8. LCD display
9. Electrodes for abdominal and lower-back areas
10. ON/OFF button
11. Programme-selection button
12. Button to select belt part
13. Button to increase intensity
14. Button to reduce intensity
15. Adjustable straps
16. RESET button
17. Double electrodes for oblique areas
Putting on the Belt:
Set-up:
Open the battery compartment cover (batteries not in-
cluded) on the back of the unit (1) and insert three AAA
batteries.
Insert the three batteries in accordance with the polarity
marks. The polarity is indicated on the battery com-
partment for proper placement, as shown in the illustra-
tion (Fig. 2).
Replace the battery compartment cover.
Putting on the Belt:
Attach the GYMFORM® ABS-A-ROUND PRO (1) to the
front part (2) of the belt using the six snap fasteners.
Ensure that they are all well fastened or the belt will not
work properly.
The GYMFORM® ABS-A-ROUND PRO belt consists of
two parts. The front part – abdominals (2), which works
the abdominal muscles, and the back part, which works
the lower-back muscles in the middle and the obliques at
the sides. The two parts are joined using the adjustable
straps (15). The adjustable straps (15) should be inserted
into the buckles (6) and closed using the quick opening
and closing system.
Attach two electrodes (9) to the abdominal part (2) and
two electrodes to the lower-back part (4) of the belt.
Attach the two double electrodes (17) to the two oblique
parts (3).