HP OfficeJet 6950 Serie Guia Del Usuario página 2

Learn more (continued)
Readme: Contains HP support information, operating system requirements, and recent printer updates.
• Windows: Insert the software CD in your computer, and then browse to the ReadMe.chm file. Double-click
ReadMe.chm to open, and then select the ReadMe in your language.
On the Web: Additional help and information: www.support.hp.com. Printer registration: www.register.hp.com.
Declaration of Conformity: www.hp.eu/certificates. Ink usage: www.hp.com/go/inkusage.
Wireless network connections
By following the instructions on the printer control panel and installing the HP printer software, you should have
successfully connected the printer to the wireless network.
Note: If you want to change the type of connection the printer is using (for example, from USB to wireless or vice
versa), you must use the tools provided with the HP printer software. For more information, see "Change the
connection type" in the Help file (see "Learn more" on page 1 of this guide for information about the Help file).
Solve wireless problems
1. Make sure the wireless light is turned on
If the blue light on the printer control panel is not lit, wireless might be turned off. To turn on wireless, on the
printer control panel display, from the Home screen, touch
button next to Wireless to turn it on.
If the blue wireless light is blinking, it means the printer is not connected to a network. Use the Wireless Setup
Wizard available from the printer control panel to make a wireless connection. From the Home screen, touch
(Wireless), touch
2. Make sure the computer or the mobile device is connected to the wireless network
Make sure your computer or mobile device is connected to your wireless network. If you cannot connect the
computer to the network, contact the person who set up your network or the router manufacturer; there might
be a hardware issue with the router or computer.
3. Run the wireless test
To check that the wireless connection is working properly, print the wireless test report.
a. Make sure the printer is turned on and paper is loaded in the tray.
b. On the printer control panel display, from the Home screen, touch
c. Touch and slide up on the screen, and touch Print Reports.
d. Touch Wireless Test Report.
If the test fails, review the report for information on how to fix the problem and run the test again.
If the wireless signal is weak, try moving the printer closer to the wireless router.
4. Restart components of the wireless network
Turn off the router and the printer, and then turn them back on in this order: router first and then printer.
Sometimes, turning off devices and then turning them back on helps resolve network communication issues.
If you still cannot connect, turn off the router, the printer, and the computer, and then turn them back on in this
order: router first, then printer, and then computer.
2
(Settings), touch Wireless Setup Wizard, and then follow the onscreen instructions.
(Wireless), touch (Settings), and then touch the
(Wireless), and then touch (Settings).