AirKing 4C630N/9012N Manual De Instrucciones De Operación Y Partes

MODELO 4C630N/9012N y 4C631P/9016P
29
1
2
4
5
23
22
18
30
6
21
10
8
25
9
27
20
11
22
4 24 12
19
18
28
26
7
4
17
13
16
LISTA DE REPUESTOS
Ref.
15
No. 4C630M/9012M
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Rev. P 3/05
3
32
31
33
34
35
7
35
Parte No. for Modelo
4C631N/9016N Descripción
2010119 2010119 Botón de Oscilación
02030062GL 02030066GL Motor
2010665 2010665 Cubierta del Motor (Frontal)
02090040 02090040 Tornillo de la Cubierta Tipo B
#7 x 7/16" PTH
02090140 02090140 Tornillo de Enlace
2010276 2010276 Enlace
02010548A 02010548A Boton Tipo H.C.
02010163 02010163 Cubierta de la Pieza del Cuello 1
02010162B 02010162B Placa de Trinquete
2010165 2010165 Bola de Oscilación Doble con
Resorte
2010252 2010252 Pieza del Cuello
02090051 02090051 Tornillo Phillips de Cabeza
Reforzada #7 x .390 PTH
2010131 2010131 Botón del Interruptor (Rotatorio) 1
02050009AWFPC 02050009AWFPC Cordón Eléctrico
02090744 02090744 Tire Cuerda
2090539 2090539 Casquillo del Cordón Accionador 1
02090272 02090272 Pata de Caucho
02090045A 02090045A Tornillo Phillips Tipo 25 #8 x 3/4" 6
2010552 2010552 Tapa del Interruptor
2060202 2060202 Placa Tracera para Colgar
2060316 2060316 Placa de Montaje
2090003 2090003 Tornillo Phillips #8 x 1-1/4"
2090529 2090529 Tuerca para Alambre
02055047 02055047 Interruptor con Cordón
Accionador
2010512P 2010512P Cuerpo
02090521A 02090521A Eje de Elevación
02090518 02090518 Resorte de Elevación
02090033 02090033 Tuerca Hexagonal
2010661 2010661 Cubierta del Motor (Trasera)
07091657 07091657 Vástago del Motor
02090060 02090060 Tornillo #7 x .8 PPH ZP Tipo B
2011212 2011200M Rejilla Plástica Trasera
2010359 2010359 Tuerca de la Rejilla
2010008 2011013 Paletas
2010058 2010059 Tapa
02096217 02096214I Rejilla Frontal
02010381A 02010381A Ornamento de la Rejilla
8
OPERATING INSTRUCTIONS & PARTS MANUAL
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT
DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO
COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
36
DESCRIPTION
AirKing 12" (30.4 cm) and 16" (40.6 cm) Wall Mounted Oscillating
Fans offer pull cord speed control, variable oscillation, a permanent
split capacitor motor and OSHA-complying front steel mesh grill with
a 6 ft (1.8m) 18/3 cord set.
37
SPECIFICATIONS
Motor ................................. 120V, 60 Hz (12", 30.4 cm)
Blade diameter .................. 12" ( 30.4 cm) Model 4C630N/9012N
Cant.
Speeds .............................. 3
1
Control .............................. Pull Cord
1
Air flow distribution ........... 90°
1
Approvals .......................... UL Listed. Close mesh Fan Guard
3
2
MODEL 4C630N/9012N
1
SPEED HIGH MED
2
CFM 930 780
3
M /s 0.44 0.37
1
RPM 1450 1300
Amps 0.40 0.30
1
Watts 39 35
1
dBA 45 41
1
GENERAL SAFETY INFORMATION
1 When using electrical appliances, basic precau-
1 tions should always be followed to reduce the
risk of fire, electric shock and injury to person,
2 including the following:
1. Read all instructions before using Fan.
1
2. Make certain that the power source conforms to the electrical
1
requirements of the Fan.
1
3. Use this Fan only as described in this manual. Any other use not
2
recommended by the manufacturer may cause fire, electrical
2
shock, or injury to persons.
4. Unplug power cord before installing, servicing, or moving the Fan.
1
WARNING:
DO NOT DEPEND UPON THE ON-OFF
1
SWITCH AS THE SOLE MEANS OF DISCONNECTING
1
POWER WHEN INSTALLING OR SERVICING THE FAN.
1
1
ALWAYS UNPLUG THE POWER CORD.
1
5. This Fan must NOT be used in potentially dangerous
1
locations such as flammable, explosive, chemical-laden
2
or wet atmospheres.
1
6. DO NOT use Fan in or near a window. Rain may create an
1
electrical hazard.
1
7. The power cord is equipped with a three-prong grounded plug
1
that must be inserted into a matching receptacle. Under no
1
1
Rev. P 3/05
2084060A
WALL MOUNTED
OSCILLATING FANS
12" (30.4 cm) MODEL 4C630N/9012N
16" (40.6 cm) MODEL 4C631P/9016P
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
circumstances must the grounding prong be cut off the plug.
Where a two-prong wall receptacle is encountered, it must be
replaced with a properly grounded three-prong receptacle in-
stalled in accordance with the National Electrical Code (NEC)
and all applicable local codes and ordinances. This work must
be done only by a qualified electrician, using copper wire only.
WARNING:
ADAPTER IS NOT RECOMMENDED. IMPROPER CON-
120V, 60 Hz (16", 40.6 cm)
NECTION MAY CREATE THE RISK OF ELECTROCUTION.
USE OF SUCH ADAPTERS IS NOT PERMITTED IN CANADA.
16" (40.6 cm) Model 4C631P/9016P
WARNING:
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
PERSONAL INJURY, DO NOT REMOVE, REPLACE,
REPAIR OR TAMPER WITH THE ORIGINALLY SUPPLIED
meets OSHA requirements.
PLUG. IF THE FAN DOES NOT FUNCTION PROPERLY, IT
MAY BE DUE TO THE SAFETY DEVICE INCORPORATED
4C631P/9016P
IN THIS PLUG. RETURN TO AN AUTHORIZED SERVICE
LOW HIGH MED LOW
CENTER OR CALL 800-233-0268, MONDAY - FRIDAY,
620 1710 1500 1330
BETWEEN 8:30 AM AND 4:00 PM EST. IF THE PLUG
0.29 0.80 0.71 0.63
WARNING LABEL IS MISSING OR DAMAGED, CALL THE
1090 1545 1394 1244
TOLL FREE NUMBER FOR A REPLACEMENT LABEL.
0.27 0.71 0.54 0.48
8. Where possible, avoid the use of extension cords. If they must be
32 77 65 57
used, minimize the risk of overheating by ensuring that they are
36 53 49 44
UL listed. Never use a single extension cord to operate more
than one Fan.
9. Do not operate any Fan with a damaged cord or plug or after the
Fan malfunctions, has been dropped or damaged in any manner.
Return Fan to authorized service facility for examination, electrical
or mechanical adjustment or repair.
10.Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock
or fire, or damage the Fan. Do not block or tamper with the Fan
in any manner while it is in operation.
11.Always place the Fan on a stable, flat, level surface when
operating, to avoid the chance of the Fan overturning. Locate the
Power Cord so the Fan or other objects are not resting on it. Do
not run Power Cord under carpeting. Do not cover Power Cord
with throw rugs, runners, or the like. Arrange Power Cord away
from room traffic and where it will not be tripped over.
12.This Fan is not intended for use in wet or damp locations.
Never locate a Fan where it may fall into a bathtub or other
water container.
13. Do not use Fan outdoors.
WARNING:
SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
1
USE OF A THREE-PRONG TO TWO-PRONG
THIS PLUG IS A SAFETY FEATURE. TO
REDUCE THE RISK OF FIRE OR ELECTRIC
SAVE THESE
INSTRUCTIONS
2084060A