Further Information; Warranty Information - Axis Q60 Serie Manual Del Usuario

AXIS Q60 Series
4. The process is now complete. The product has been reset to the factory default settings.
If no DHCP server is available on the network, the default IP address is 192.168.0.90
5. Using the installation and management software tools, assign an IP address, set the
password and access the video stream.
It is also possible to reset parameters to factory default via the web interface. Go to Setup
> System Options > Maintenance.

Further Information

The User Manual is available at www.axis.com
Visit www.axis.com/techsup to check if there is updated firmware available for your network
product. To see the currently installed firmware version, go to Setup > About.
Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and
guides.
Scan the QR code to view a video on how to assemble the supplied RJ45 Push-pull Connector (IP66).

Warranty Information

For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty/
20