Wifi Specifications; Using Your Robot; Preparing The Room For A Cleaning Run; Functions Of The Start/Stop Button - Philips FC8778 Manual Del Usuario

English
12
Dashboard
DemoRVC
"I'm waiting for a command"
Start cleaning
Return to charging base
Clean Settings
"I'll clean for 90 minutes"
2
60 m or more Combine modes
Dry wipe: OFF

Using your robot

Preparing the room for a cleaning run

Functions of the start/stop button

8 The robot is connected when you see the robot in the screen of your app.
This will look like the picture on the left.
What to do if WiFi setup fails
If no WiFi connection is established after 1 minute, the appliance enters
access point mode and waits for a new attempt to set up the connection.
For iPhones:
1 Open settings, choose 'Wi-Fi' and select 'PHILIPS Setup'.
2 Select the access point starting with 'PHILIPS Setup'.
3 Go back to the Philips SmartPro app and click 'Next' to set up the WiFi
connection.
Android smartphones:
1 Go to 'Settings' and tap WiFi.
2 Select 'PHILIPS Setup'.
3 Go back to the Philips SmartPro app and click 'Next' to set up the WiFi
connection.

WiFi specifications

- The robot is designed to be connected to standard consumer routers
that use WEP, WPA-PSK, WPA2-PSK encryption keys, or no encryption
(open WiFi network).
- Connecting the robot to public hotspots, office networks or hotel
networks is not possible in most cases.
- The robot will not work with 5 GHz routers. If you encounter problems
with connecting the robot to the router, please check if your router can
also be changed to the 2.4 GHz setting.
Before you start the robot on its cleaning run, make sure that you remove all
loose and fragile objects from the floor.
Also remove all cables, wires and cords from the floor.
The start/stop button has 5 functions: