To Assemble The Mulch Plug (Accessory); Operation; Husqvarna Connect - Husqvarna LC 247i Manual De Usuario

3. Attach the grass bag to the grass catcher frame with
the clips.
4. Lift the rear cover.
5. Attach the grass catcher to the top edge of the
chassis.
6. Put the lower part of the grass catcher into the grass
discharge channel.
Introduction
WARNING:
product, you must read and understand the
safety chapter.

Husqvarna Connect

Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product:
• Extended product information.
• Information about, and help with, product parts and
servicing.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect
app to connect and register the product.
14

Operation

Before you operate the
To assemble the mulch plug
(accessory)
1. Lift up the rear cover and remove the grass catcher.
2. Put the mulch plug into the discharge channel.
3. Replace the blade with the mulch blade that is
supplied in the mulch kit. Refer to
replace the blade on page 19 .
®
Bluetooth information (LC 247iX,
LC 347iVX, LC 353iVX)
®
Bluetooth wireless technology
Bluetooth
The symbol for
on when your mobile device is connected to the product.
To remove and
®
wireless technology comes
1627 - 002 - 18.01.2021