To Assemble The Mulch Plug (Lc 551Iv Accessory); To Assemble The Grass Catcher (Lc 551Iv) - Husqvarna LB 548i Manual De Usuario

4. Turn the handle to the side for a good operation
position when you operate the product near a wall.
To assemble the grass catcher (LC
551iV)
1. Attach the grass catcher frame to the grass bag with
the rigid part of the bag on the bottom. Keep the
handle of the frame on top of the grass bag.
2. Attach the bottom section of the grass catcher frame
in the groove on the bottom of the grass catcher.
3. Attach the grass bag to the grass catcher frame with
the clips.
1630 - 004 -
4. Lift the rear cover.
5. Attach the grass catcher to the top edge of the
chassis.
6. Put the lower part of the grass catcher into the grass
discharge channel.
To assemble the mulch plug (LC 551iV
accessory)
1. Lift up the rear cover and remove the grass catcher.
2. Put the mulch plug into the discharge channel.
3. Replace the blade with the mulch blade that is
supplied with the mulch kit. Refer to
blade on page 26 .
To replace the
17