General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - EGO HT2400 Manual De Instrucciones

generAl Power tool sAfetY wArnings

WARNING:
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warning refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.

worK AreA sAfetY

 Keep work area clean and well lit. cluttered or dark areas invite accidents.
 Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
 Keep children and bystanders away while operating a power tool. distractions can
cause you to lose control.

electricAl sAfetY

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
 Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
 Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
damaged or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an Rcd reduces the risk of electric shock.
8
56V LiThiUM-iOn cORdLEss hEdgE TRiMMER
Read all safety warnings and instructions. Fail to follow the