Assembling Your Vacuum - Shark Slim Upright NV200 Serie Manual De Instrucciones

ASSEMBLING
YOUR VACUUM
TIP: Use cord clip located
on the back of wand to
hold cord in place while
vacuuming.
TIP: To store your
vacuum, wrap cord
around cord hooks.
1
Place the vacuum body
onto floor nozzle.
7
1-800-798-7398
STEP 1 STEP 2
CLICK
CLICK
2 Insert wand into top of the
vacuum.
STEP 3
CLICK
CLICK
3 Insert handle into top of 4 Store tools on the
wand and click into place. accessory posts.
Insert hose into hose
connector and click into
place.
STEP 4 STEP 5
5 To remove the accessory
holder, first take off the
dust cup. Then pull out the
tab on the right side (when
viewing from the back of
the vacuum.) To replace
the accessory holder, align
the pins into the hinge on
the vacuum and clip back
into place.
s h a r kc l e a n . c o m
8