Troubleshooting - Axxess AXDIS-CH5 Instrucciones De Instalación

STEERING WHEEL CONTROL SETTINGS
Dual assignment legend
1. Not allowed 6. ATT/Mute
2. Not allowed 7. Preset-Up
3. Seek-Up/Next 8. Preset-Down
4. Seek-Down/Prev 9. Power
5. Mode/Source 10. Band
* Not applicable in this application
(CONT)
11. Play/Enter 16. Fan-Down *
12. PTT 17. Temp-Up *
13. On-Hook 18. Temp-Down *
14. Off-Hook
15. Fan-Up *

TROUBLESHOOTING

Resetting the AXDIS-CH5
1. The Blue reset button is located inside the interface, between the two connectors. The
button is accessible outside the interface, no need to open the interface.
2. Press and hold the reset button for two seconds, and then let go to reset the interface.
3. Refer to Programming section from this point.
REV. 1/23/2020 INSTAXDIS-CH5
7