Technical Specifications - Beurer IS 40 Instrucciones Para El Uso

• Make sure that no water penetrates into the device. If this should
ever happen then only use the device once it is completely dry.
• Do not use any chemical cleaners or abrasive agents for clean­
ing.
• Please dispose of the device in accordance with the direc-
tive 2002/96/EG – WEEE (Waste Electrical and Electronic
Equipment). If you have any queries, please refer to the
local authorities responsible for waste disposal.
Technical Specifications
Model
Power supply
Weight
Max. temperature of
heating plates
Warm-up time from room
temperature to max.
temperature
Maximum permissible
operating temperature
Maximum permissible
storage temperature
Explanation of symbols
Rights are reserved to make changes to the technical specifications
without notice for updating purposes.
14
IS 40
9 V block battery Alkaline
37 g (without battery)
68 °C +0 °C/­3 °C (without skin contact)
approx. 47 °C ±3 °C (with skin contact), value
very much depends on skin properties
approx. 25 seconds (with skin contact)
0 °C to +40 °C, 20­65% relative humidity
0 °C to +60°C, <95% relative humidity
Application part type B
Read the Instructions for Use