Technical Specifications; Troubleshooting Guide - Beurer UHP 26 Manual De Instrucciones

• Reshape the still damp heating pad to the original size immediately after washing, and dry flat,
spread on a clothes drying rack.
• Do not hang the heating pad up to dry with pegs or similar items. The heating pad may otherwise
be damaged.
Storage
NOTICE
• Let the heating pad cool before putting it away. The heating pad may otherwise be damaged.
• To prevent the heating pad from becoming sharply creased, do not store other objects on top of the
heating pad. The heating pad may otherwise be damaged.
• If you do not intend to use the heating pad for any length of time, store it in the original packaging
in a dry environment and without weighing it down.
• Disconnect the mains connection and the controller from the heating pad to do so.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.
7� Technical Specifications
Model:
Type:
Heating Pad Size:
Power supply:
Wattage:
Pad Material:
Timer:
Temperature levels:
Operating Conditions:
Storage Conditions:
8� Troubleshooting Guide
Problem
The heat indicator light is not illuminated while
• The controller is properly connected to the heating
pad.
• The mains plug is connected to the working elec-
trical outlet.
• The sliding switch is set to 1,2,3,4,5 or 6.
UHP 26
U-SP16RX
12 x 24 in (30.5 x 61 cm)
120 V / 60 Hz
50 W
100% polyester
120 minutes
6 levels
Level 0: OFF
Level 1: minimum heat
Level 2-5: medium heat
Level 6: maximum heat
32°F to 95°F (0°C - 35 °C)
< 80% humidity
23°F to 104°F (-5°C to 40°C)
< 80% humidity
Cause
The safety system has
switched the heating
pad off permanently.
7
Solution
Send the heating pad
and the controller for
servicing