Hioki FT6380-50 Manual De Instrucciones página 44

40
2.5 Convenient function
2.
Set the alarm type (Hi/Lo).
Using the
and press the
flashing.
*The Hi/Lo setting is saved once the following setting has been
configured. If you press the
ting but before saving the threshold and thereby cancel the config-
uration process, any changes to the Hi/Lo setting will not be
saved.
▼ and ▲ keys, select the alarm type (Hi/Lo),
OK key. The next threshold setting will start
Hi: The alarm will sound if the measured value
is greater than the set threshold value.
Lo: The alarm will sound if the measured value
is less than the set threshold value.
Fn
HIOKI FT6380B983-00
key after configuring the Hi/Lo set-