Wireless Communication Function (Gennect Cross) - Hioki FT6380-50 Manual De Instrucciones

46
2.5 Convenient function
Wireless Communication Function
(GENNECT Cross)
When the wireless communications function is enabled, you can
review measurement data and create measurement reports on
mobile devices.
For more information about this functionality, see "GENNECT
Cross Official Website" (application software, free of charge).
GENNECT Cross Official Website
https://gennect.net/en/cross/index
• The communication distance is approx. 10 m (line of
sight).The distance over which data can be sent and
received varies greatly depending on whether there
are any obstructions between the paired instruments
(for example, walls, metal barriers, etc.) and on the dis-
tance between the instrument and the floor (or
ground). To ensure stable communication, verify ade-
quate signal strength.
• Although the GENNECT Cross is provided free of
charge, downloading or using the application software
may incur Internet connection charges. Such charges
are the sole responsibility of the user.
• The GENNECT Cross is not guaranteed to operate on
all mobile devices.
• The Z3210 uses 2.4 GHz band wireless technology. It
may not be possible for the device to establish a wire-
less connection when used in the vicinity of other
devices that use the same frequency band, for exam-
ple Wi-Fi devices (IEEE 802.11.b/g/n).
• When the app is launched for the first time (before
being paired with any instrument), the instrument set-
tings screen will be displayed.
HIOKI FT6380B983-00