Pleasant Hearth ZCB100 Guia De Inicio Rapido página 4

PLEASANT HEARTH GAS FIREPLACE INSERTS
BLOWER INSTALLATION
NOTE: If any of the original wire as supplied with the appliance must be replaced, it must be
replaced with a wire of at least an equal temperature rating.
NOTE: Installation may require two people.
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can
cause improper and dangerous operation.
Verify proper operation after servicing.
1. Remove top grill (if frame is not already removed).
2. Remove bracket from top vent by unscrewing x4 screws
3. Assemble Fan and the removed bracket together by
screwing x4 screws into the top of the bracket.
1
2
3
4
Screws