Bostitch BRN175 Manual De Operación Y De Mantenimiento página 11

fasteners from magazine before making adjustments or personal injury may
result.
ACTION
Lubricate tool with 5-7
drops of BOSTITCH
Pneumatic Tool Oil
Drain compressor
tanks and hoses daily
Clean canister, feed
piston area and contact
trip mechanism.
Before each use, check
to insure all screws,
nuts and fasteners are
tight and undamaged.
metallic parts of the tool. These chemicals may weaken the materials used in these
parts. Use a cloth dampened only with water and mild soap. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
REPAIRS
For assistance with your tool, visit our website at www.bostitch.com for a list of
service centers, or call the BOSTITCH Customer Care Center at 1-800-556-6696. In
Canada please call us at 1-800-567-7705 or visit www.BOSTITCH.com.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our
service website at http:/www.bostitch.com. You can also order parts from your
nearest BOSTITCH Factory Service Center or BOSTITCH Authorized Warranty
Service Center. Or, you can call our Customer Care Center at 1-800-556-6696. In
Canada please call us at 1-800-567-7705 or visit www.BOSTITCH.com.
BRN175_9R209323_MAN_kf V2_multi.indd 11
Disconnect air line from tool, engage trigger lock and remove
WHY
Prevents failure
of o-rings
Prevents
accumulation
of moisture in
compressor and nailer
Permits smooth
operation of
magazine,
reduces wear and
prevents jams.
Prevents jams, leaks
and premature
failure of tool parts.
Never use solvents or other harsh chemicals for cleaning the non-
DAILY MAINTENANCE CHART:
HOW
Insert drops into air fitting
on end cap of tool
Open petcocks or other drain
valves on compressor tanks.
Allow any accumulated
water to drain from hoses
Blow clean with compressor
air. The use of oils, lubricants
periodically or solvents is
not recommended as they
tend to attract debris.
Tighten loose screws
or other fasteners using
the appropriate hex
wrench or screwdriver.
11 - ENG
MAINTENANCE:
CLEANING
SERVICE:
1/28/15 7:41 AM