Press To Exit" Button; Installation; Press To Exit" Button Wiring; Controlling An Electrical Latch - SOMFY VSYSTEMPRO Manual De Instalación

EN

6.1 Installation

It is possible to wire another button to be positioned next to the motorised door or door
equipped with an electric lock (internal side of the property). When this button is pressed,
the relay shall be actuated for the amount of time configured with switches 4 and 5 (see
5.1 Switch No. 28, page 9).

6.2 "Press to exit" button wiring

7 CONTROLLING AN ELECTRICAL LATCH

7.1 Installing a call memory latch

It is possible to control, via a one-touch control, an electrical call memory latch that
operates at 24 V (CA or CC), with no additional power supply.
The pulse supplied by the external module relay needs to be checked that it is
sufficent to activate the latch. If it is not, this latch should be used as model without
call memory, equipped with an external power supply and actuated by the external
module relay in "dry contact" mode.
11

6 "PRESS TO EXIT" BUTTON

Copyright © 2016 Somfy SAS. All rights reserved.