Max/Min Key; Backlight Key; Automatic Power-Off Function; Measuring Operation - Facom 711B Manual De Instrucciones

MAX/MIN Key

Press the key to show the maxinum reading value
among measuring data, and the "MAX" symbol appears
on the display, press the button again, the "MIN"
symbol appears on the display and will show the
minqum reading value among measuring data, press
the button a third time to return to normal mode.

Backlight Key

Press the key to turn on the backlight. Press the key again
to manually turn off the backlight.

Automatic Power-Off Function

In the measurement process, if there is no activity by the
function key or function selection switch for 15 minutes,
the meter will automatically shutdown (sleep state). Press
"FUNC" key to power on and the automatic shutdown
function will be cancelled.

Measuring Operation

Don't measure any RMS voltage higher than 600V
DC or AC, to prevent injury or damage to meterand
equipment.
SMART Function Measurement
Move the rotary switch to the "Smart Funtion" position
the default mode is "AC Voltage", "DC Voltage",
"Resistance" or "Continuity", connect the test leads
cross the circuit or load to be measured. It will be an
Automatic judgement on the LCD display.
AC Voltage or DC Voltage, or Continuity or Resistance,
are measured simultaneously.
26
NU-711B_0618 7 langues.indd 26
WARNING
22/06/2018 09:20:54