Continuity Measurement - Facom 711B Manual De Instrucciones

Continuity Measurement

Function
- Open circuit voltage: approx. 0.4V.
- Overload protection: 250V DC or AC rms.
Frequency (Through grade HZ/DUTY)
Measuring
range
60Hz
600Hz
3kHz
- Overload protection: 600V AC RMS.
- The input voltage range: ≥2V (input voltage will increase
when the frequency to be measured increases).
AC Current (Clamp head converter)
Measuring
range
400A
1500A
- Input impedance: 10MΩ.
- Frequency range: 45 Hz---65Hz.
- Input signal: 30A (720.P30).
NU-711B_0618 7 langues.indd 31
Measuring
range
When built-in buzzer
sounds, the resistance
to be tested is less
than 40Ω.
Resolution
0.1Hz
1Hz
10Hz
Resolution
3A 1A/100mV
30A 1A/100mV
1A/0.1mV
1A/0.1mV
400A/1500A (720.P1500).
Resolution
Open circuit voltage:
about 0.4V.
±(1.0% of reading + 5 digits)
±(2.5% of reading + 8 digits)
±(3.0% of reading + 10 digits)
Accuracy
Accuracy
Accuracy
22/06/2018 09:20:54
31