Usb Play Operation - Lenco CS-322 Manual De Instrucciones

TA button (19) is operated as follows:
When pressed, it is engaging whether TA mode on or off.
When TA mode, is on and a traffic announcement is transmitted:
When the unit was in CD (MP3) ESB/MEMORY CARD mode or AUX IN mode, it will switch temporarily to radio
mode.If the volume level was under the threshold point it will be raised to the threshold point. But when
changed the volume level, which was more than the threshold point (min. TA volume level), it will be set to the
last level.
When TA mode is on, TA of individual segment is turned on. When a TP station is received, TP of individual
segment is turned on. TA interruption function
The current traffic announcement is cancelled by pressing this key.
But the TA mode will not be off.
Broadcast station name data expressed in alphanumerically characters
AF: Alternative Frequencies
Frequency list of broadcasting stations transmitting the same program
TP: Traffic Program Identification
Identification data for traffic information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic information is being transmitted or not
PTY: Program Type Code
Contents of programs such as news, light music, sports etc

USB PLAY OPERATION

In the front panel of the unit, there is an USB interface (21). You can connect an USB driver through this interface.
When you connect an USB driver through the interface, the unit will search the MP3/WMA files in the USB driver
and start to play MP3/WMA files automatically.
If in other mode, you can also press MOD button (1) to select USB mode.
SELECTING FILE
Press ▎ ▎button (17) to move to the previous file or the following file. file number shows on
button (2) or
display.
Hold ▎ ▎button (17) to fast reverse or fast forward. USB play starts from when you release
button (2) or
the button.
PAUSING PLAYING
Press 1/>II button (16) to pause USB player. Press it again to resume play.
PREVIEWING ALL FILES
Press 2/INT button (15) to play first 10 seconds of each file. Press again to stop intro and listen to file.
REPEATING THE SAME FILE
Press 3/RPT button (14) to continuously repeat the same track. Press it again to repeat all files.
PLAYING ALL TRACKS IN RANDOM
Press 4/RDM button (13) to play all files in random order. Press again to cancel the function.
SELECTING DIRECTORY UP/DOWN
Press 5/DIR- button (12) or 6/DIR+ button (11) to select directory downward or upward. If the USB/SD does not
contain any directory, there is no function of pressing 5/DIR- button (12) or 6/DIR+ button (11).
SELECTING FILE BY FILE NO.
Press "AMS"(4) button. It is track no searching. It will show "TRK ***" on LCD. Using 1/2/3/4/5/6/7(BAND) /8(
OPERATION
7
OPERATION & PERFORMANCE
/9( )/0(DISP) button to enter the track number. After finished. Press SEL/ENT
button to start to play. Or use vol/sel (5) to scroll to the desired track number then press SEL/ENT button to play.
TAKARA's auto radio RDU 310(TAKARA) can support USB drivers with a capacity up to 8GB.
MEMORY CARD PLAY OPERATION
In the front panel of the unit, there is an memory card interface (22). When you insert a memory card in the memory
card interface, the unit will search the MP3/WMA files in the card and start to play MP3/WMA files automatically. The
operation is the same with the MP3/WMA operation described above. If in other mode, you can also press MOD
button (1) to select memory card mode.
TAKARA's auto radio RDU 310(TAKARA) can support memory cards with a capacity up to 8GB.
PERFORMANCE
FM
Tuning range 87.5~108.0 MHz
Sensitivity 4uV(S/N=30dB)
S/N ratio 50 dB
Stereo separation >25 dB
Freq. Response 40Hz~12KHz
)
MW MP3/WMA
522~1620KHz ---
--- ---
50 dB 60 dB
--- 50dB
80Hz~2.2KHz 20Hz~16KHz
8