Cleaning - Easy Home MS-201 Manual Del Usuario

Cleaning

• Sewing machine needles are available in different sizes.
• The needle must always be straight and sharp for smooth
1. Turn the handwheel
to its highest position and use the presser foot lever
foot 14 .
2. Hold the needle firmly in place and loosen the needle clamp screw
turning it counterclockwise. If necessary, use tools for assistance. You can
now remove the needle.
3. Insert the new needle into the needle holder
4. The flat side of the needle must be aligned with the needle clamp screw.
5. Hold the needle firmly in place and tighten the needle clamp screw.
6. After you have replaced the needle, manually turn the handwheel to check
whether the sewing machine sews neatly.
Do not operate the on/off switch
has been inserted correctly and check if the sewing machine sews neatly
when operated manually.
Cleaning
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may
cause a short circuit.
− Never submerge the sewing machine in water or other
liquids.
− Make sure that no water or other liquids penetrate the
housing.
22
Small needles are suitable for fine/delicate fabrics and large
needles for heavy fabrics. The supplied needles are suitable
for average fabric thicknesses. If you wish to sew with very
stiff or fine fabric, you should buy a sewing machine needle
suitable for the fabric and use it.
sewing. Replace the needle if it is bent, blunt or broken.
7 away from you (clockwise) to bring the needle
19 until it stops.
or the foot pedal
10
26
to lower the presser
22 until the needle
17
by
13