Easy Home MS-201 Manual Del Usuario página 25

Problem
The needle was inserted
incorrectly.
A bad needle was used.
The combination of needle size/
thread size/fabric is incorrect.
Stitches
Fibers or lint are trapped
are being
beneath the throat plate.
skipped.
The thread has been
improperly guided through the
machine.
The presser foot is not pressed
down.
The tension of the upper thread
is too high.
The thread has been
improperly guided through the
The fabric
machine.
curls up.
The wrong needle is being
used.
The combination of needle size/
thread size/fabric is incorrect.
The combination of needle size/
The fabric
thread size/fabric is incorrect.
is not being
A bad needle was used.
properly fed
through.
The thread is tangled.
The needle was inserted
incorrectly.
A bad needle was used.
The needle
The combination of needle size/
breaks.
thread size/fabric is incorrect.
The fabric is being pulled too
much.
Possible cause
Troubleshooting
Solution
Reinsert the needle.
Use another needle.
Change the needle or
thread.
Use a fine brush to clean
the throat plate.
Rethread the thread.
Lower the presser foot
lever to lower the presser
foot.
Reduce the tension of the
upper thread.
Rethread the thread.
Change the needle and use
another one.
Change the needle or
thread.
Change the needle or
thread.
Change the needle and use
another one.
Rethread the thread.
Reinsert the needle.
Use another needle.
Change the needle or
thread.
Let the feed dog feed
through the fabric. Don't
pull on the fabric.
25