Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
Reversible Multi-Vane Drills are designed for heavy drilling and reaming.
●
Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
●
Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
●
This tool can exert strong forces on the operator. Use proper support to control these
forces.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com
Product Specifications
Drills
33H/33H-EU
33J/33J-EU
33SJ/33SJ-EU
33SKA/33SKA-EU
33SMA/33SMA-EU
Drills
33H/33H-EU
33J/33J-EU
33SJ/33SJ-EU
33SKA/33SKA-EU
33SMA/33SMA-EU
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
16598039_ed3
WARNING
Free Speed
Type of Throttle
Reversible, Roll
Reversible, Roll
Reversible, Roll
Reversible, Roll
Reversible, Roll
Length of
Morse
Feed
Taper
Socket
in (mm)
No. 2
3-7/8 (98)
No. 2
4-1/4 (108)
No. 3
4-1/4 (108)
No. 3
4-1/4 (108)
No. 3
4-1/4 (108)
WARNING
Capacity in Steel
Drilling
rpm
in (mm)
800
29/32 (23)
450
1 (25)
450
1 (25)
300
1-1/4 (32)
185
1-1/4 (32)
Sound Level dB(A)
(ISO 15744)
† Pressure (L
) ‡ Power (L
p
--
--
--
98.8
96.1
*K = Vibration measurement uncertainty
Reaming
in (mm)
3/4 (19)
15/16 (24)
15/16 (24)
1 (25)
1-1/4 (32)
Vibration m/s²
(ISO28927)
)
Level
w
--
< 2.5
--
< 2.5
--
< 2.5
109.8
< 2.5
97.1
< 2.5
EN
*K
--
--
--
--
--
EN-1
Publicidad
Tabla de contenido
