Product Safety Information; Product Specifications - Ingersoll Rand 1 Serie Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For Additional information refer to Air Drills Product Safety Information Manual
Form 04580353.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Type of
Capacity
Models
Handle
in (mm)
1AL1 Pistol
1P06ST4 Pistol
1P09ST4 Pistol
1P38ST4 Pistol
1S30MF4 Inline
1LL1A1 90° Angle
1LJ1A1 90° Angle
1LL1 Inline
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16575557 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
16572059_ed2
Chuck Free Female
Speed Threaded
rpm Spindle † Pressure (L
1/4 (6) 2800 ---
1/4 (6) 600 ---
1/4 (6) 900 ---
1/4 (6) 3800 ---
1/4 (6) 3000 ---
--- 2700 1/4-28
--- 3700 1/4-28
1/4 (6) 2300 ---
Sound Level dB(A)
(ISO15744)
) ‡ Power (L
p
71.1
71.9
74.2
76.2
70.3
70.0
71.2
70.0
* K = Vibration measurement uncertainty
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - through fitting
11. Grease - through fitting
12. Grease - through fitting
EN
Vibration (m/s²)
(ISO28927)
) Level *K
w
82.1 5.9 1.6
82.9 < 2.5 ---
85.2 < 2.5 ---
87.6 5.9 1.6
81.3 14.3 4.3
81.0 3.8 0.8
82.2 3.8 0.8
81.0 3.1 0.7
EN-1