User Instructions; Important - Easy Home EE-5201W Manual Del Usuario

Ocultar thumbs Ver también para EE-5201W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replace the water tank cap, aligning the
threads on the tank with the threads on the
cap, and turn it clockwise. (See Fig. 3)
Turn the tank over, holding one hand by the
top handle and another hand under the
water tank. Place the full water tank on the
base, making sure it fits securely. Place the
medicine cup on top of the mist channel.
Plug the power supply cord into a wall outlet
and turn on the unit. The On/Off dial is located on the base.
The power light will turn blue.
Use the On/Off dial to adjust the intensity of the mist output by selecting
either (LO) for lower mist output or (HI) for higher mist output.
When the humidifier runs out of water, the blue power light will turn off and
the mist output will stop. This safety feature cues a water level sensor to turn
off the heating element once the water level sinks below the required level in
the water basin. A small orange light will appear to indicate that the
humidifier has automatically turned off. Turn the humidifier off and unplug
before removing and refilling the water tank.

IMPORTANT:

As a safety feature, when the humidifier runs out of water, the power indicator
light will turn off, an ORANGE light will appear near (HI) on the control knob and
the mist output will stop. Turn the humidifier off and unplug the unit before
removing and refilling the water tank.
Note:
If the unit has overheated, a small RED light will appear near (HI) on the
control knob. Turn off the unit, unplug and allow to cool completely for 15 minutes
to reset the humidifier.
How to use the medicine cup
The medicine cup allows the addition of
medications and essential oils recommended for
use with warm mist humidifiers only.
Remove the medicine cup from the top of the
mist chamber for easier filling.
BE CAREFUL not to overfill the medicine cup.
Overfilling may cause medicine to spill into mist

User instructions

Fig. 3
9

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido