Troubleshooting - Easy Home EE-5201W Manual Del Usuario

Ocultar thumbs Ver también para EE-5201W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

CAUTION: DO NOT attempt to repair the motor or nebulizer yourself. If the
humidifier continues to not operate, please call our service center.
Problem
If humidifier
does not have
any power:
Condensation
forms around
humidifier and
windows:
If humidifier has
stopped, BLUE
light is off and
small RED light is
on:
If there is a
strange odor:
The power
indicator light is
blue, but there is
no mist being
emitted:
Solution
Ensure unit is properly plugged into a power outlet.
Check that the Control Knob is turned to the ON
position.
If Power On indicator light does not come on, contact
help@myproduct.care
Adjust Control Knob to decrease mist output to low.
Leave room door cracked open during humidifier
operation.
Adjust Control Knob to turn humidifier off and unplug.
After 5 minutes, plug in humidifier and turn knob to
desired mist level.
Clean the Water Tank with a water and vinegar
solution and rinse with clean water.
Leave the empty Water Tank open for some time
(without the Water Tank Cap attached) in a cool place.
Check that there is water in the Water Tank.
Make sure that nothing is blocking the mist output.
Check that the Fan Vent on the bottom of the
humidifier is not blocked.
Empty and rinse the Water Basin with cool tap water.
Check for possible mineral deposits on the Water Level
Sensor and Heating Element.
Troubleshooting
11

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido