Utilization Limits - Polytropic PAC 16 Manual De Instrucciones

• Parts moving with automatic start-up (fan)
• Cutting edges (evaporator)
In order to avoid any accidents, prohibit appliance access to children and
pets. Never cover the appliance whilst in operation and never put your
fingers, or other object inside.
Never turn on or run the appliance with any of its panels removed.
Pressure controller
Polytropic heat pumps are provided with HP pressure controller set to 30 Bar.

Utilization limits

To be sure the heat pump has been correctly selected, Polytropic must has
been previously contacted with a selection file (available on demand) in
order to validate such selection.
PAC heat pump models are designed to work from 10° C to 35° C ambiance
temperature using a pool cover.
R-PAC heat pump models are designed to work from -5° C to 35° C
ambiance temperature using a pool cover.
For a product selection that has not been approved by Polytropic and
working outside the above ranges; Polytropic dissociate the responsibility
of any malfunction.
Before installing the heat pump, you will have to check that impedance of your
swimming pool electricity power supply shall not be more than 0.042 . Contact
your electricity supplier if needed.
If the electricity supplier can't help you to get this impedance, the electrical
installation could risk of having a certain voltage loose after few minutes
that the machine has started up.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the
appliance.
- 31 -