Polytropic PAC 16 Manual De Instrucciones página 40

Error messages
- E0
- E1
- LO
(One of the probes measures a temperature lower than AL)
- HI
- EE
If alarm LO or HI is displayed, it means that the heat pump is working out of
its limits
These units are designed to operate in ambient air temperatures between 10° C
and 35° C.
When compressor is stopped, it takes two minutes to restart.
Probe 1 error (water temperature)
Probe 2 error (defrost temperature)
Alarm of low temperature
Alarm of low temperature
(One of the probes measures a temperature higher than AH)
Reading memory error
- 40 -