Using Your Citrus Press - Krups ZX7000 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Ensure that the ON/OFF selector knob (K) on the right side of
the base of the appliance is in the OFF position before plugging
in the citrus press - Fig.9. Your citrus press is now assembled
and ready to use.
Your citrus press offers two different modes of use:
- A "lever-operated" function for squeezing your citrus fruits
quickly and cleanly - Fig.1.
- A "manual" mode for squeezing your fruit by hand - Fig.2.

USING YOUR CITRUS PRESS

Your citrus press can be used with or without the pressing lever
(A). The lever will help press citrus fruits against the rotating jui-
cing cone for clean, efficient extraction and is helpful when pres-
sing larger fruits, or large quantities of citrus fruits.
In manual mode, fruit is pressed by hand against the rotating jui-
cing cone (E).
There are three positions on the ON/OFF selector knob:
Fig. 9
OFF position
Fig. 10 Pressing with lever
Fig. 11 Manual pressing
To press citrus fruit using the pressing lever:
Raise the lever to the upper position. Place a glass on the drip tray
(J), under the pouring spout (G1). Cut your citrus fruits in half.
Place your fruit cut side down on the cone, applying gentle pres-
sure. Turn the ON/OFF selector knob (K) to the LEVER position
- Fig.10. Lower the lever to press the fruit between the fruit press
(D) and cone. The citrus press will start working automatically,
and the cone will rotate. Center fruit and maintain constant pres-
sure for best results.
When pressing is complete, close the drip stopper (H) and remove
your glass.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido