Qstarz BT-Q818 eXtreme Guía De Instalación Rápida página 4

English
Next Generation GPS
G. Switch to eXtreme 5Hz sport mode by QstarzGpsView software
application
eXtreme 5Hz sport mode allows your GPS to get the same or even higher positioning
and accuracy ability during eXtreme sports.
G-1 Install the USB driver (refer to E-4). Connect BT-Q818eXtreme with your PC and
Switch BT-Q818eXtreme to <USB> position.
G-2 Execute QstarzGpsView.exe from Driver CD "Tools\QstarzGpsView.exe". Select
COM port (refer to E-4, item 3) and set the baud rate to
make connection.
G-3 Click "Setup" tab, and you can change to eXtreme Sport mode under Fix Update
Rate. The higher number means the device can bear extremer environment. After
select an update rate, click "Set" to save the setting.
NOTE: The default setting for Q818eXtreme is 1Hz. If you are no longer to use
eXtreme 5Hz sport mode, either to switch it from software or to hard reset the
GPS by unplugging the battery for 5 mins.
H. OTHERS
H-1 LED Indicators
LED Status
Power
(Red/Green)
Bluetooth
(Blue)
GPS
(Orange)
Super 51-CH GPS Receiver
Flash
Low Power (Red)
Fully charged
(Green)
Flash per 1 sec.:
Bluetooth
connected and
transmitting Mode
Flash per 5 sec.:
Power saving mode
GPS position is
fixed, Navigation
4
BT-Q818 eXtreme Quick Guide
115200
. Then click "On" to
ON
Recharging
(Green)
Not
connected/Pairing
Detecting Satellite,
GPS position not
fix
OFF
GPS not
powered /
USB
GPS not
powered