Including A Digital Audio Connection - Bose LIFESTYLE Serie Guía De Usario

English TAB 2

Including a digital audio connection

In addition to the stereo connection, you can make a
high-quality digital audio connection if your device
provides such a connector.
Note: To avoid temporary loss of audio (common signal
drop outs during digital transmissions), keep the stereo
audio cable connected to your device and the media
center. This allows for uninterrupted audio performance.
1. Check to see if your device has a digital audio
connector. It can be:
• An optical connector that uses optical cable.
This cable is provided in the carton.
Be sure to remove the plastic cap from each
plug.
Cap
• A coaxial (COAX) connector that uses a simple
COAX or RCA cable (like the composite cable
included in the carton).
This cable is available at electronics stores.
TAB 3 TAB 4 TAB 5 TAB 6
C
OMPLETE
2. Using the appropriate cable, insert one end into the
digital audio connector on your device.
3. Insert the other end of the cable into either:
• The Optical IN connector on the media center.
• The coaxial connector for CBL•/SAT, VCR, or
AUX on the media center.
Note: For an optical connection to a device other than
a cable or satellite box, you need to set the system to
recognize the signal from this other device.
Refer to "Other system options" on page 59.
TAB 7 TAB 8
S C
YSTEM ONNECTIONS
33