Connecting The System To Power - Bose LIFESTYLE Serie Guía De Usario

English TAB 2
Connecting
10
the system
to power
1. Plug the free end of the VS-2 power cord into an
AC (mains) outlet.
2. Place the power supply on the floor well below the
media center.
If you are using a plasma TV, move the power
supply as far from your TV as is practical.
TAB 3 TAB 4 TAB 5 TAB 6
C
OMPLETE
3. Plug the free end of the Acoustimass
into an AC (mains) outlet.
Note: Bose recommends using a high-quality surge
suppressor on all electronics equipment. Such suppres-
sors can eliminate the vast majority of failures attributed
to surges and may be purchased at electronics stores.
Voltage variations and spikes can damage electronic
components in any system, resulting in damage not
covered by the limited warranty.
4. Continue with 11 on the next page for getting the
remote control ready.
TAB 7 TAB 8
S C
YSTEM ONNECTIONS
®
power cord
39