Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
27
26
instructions for use
maintenance and cleaning
do not use jet of steam for cleaning
Before any operation disconnect the appliance electrically. Wash the
enamelled parts with lukewarm water and detergent. Do not use
abrasive products.
Wash the burner spreader frequently with boiling water
and detergent being sure to remove any deposits which
could block the flame outlet. Rinse the stainless steel
parts well with water and dry them with a soft cloth. To
clean the hob use slightly damp sponges and wiping
cloths: if too much water is used it could penetrate the
internal parts and damage electrical parts.
The grids of the hob can be washed in the dishwasher.
For persistent stains use normal non-abrasive detergents, specific
products commonly available on the market or a little hot vinegar.
Clean the glass hob with hot water, avoiding the use of rough
cloths. Do not use stainless steel pads or acids for cleaning.
To prevent lighting difficulties, carefully clean the lighting spark
plugs regularly (ceramic and electrode). To use the electric hot plates
use damp wiping cloths and grease slightly with a little oil when the
hot plate is still lukewarm. Periodically, or if the knobs become diffi-
cult to turn, contact a qualified engineer to lubricate the taps.
Contact a qualified engineer to deal with any other problems which
may arise during use.
IMPORTANT: IN CASE OF BURNERS REMOVAL FOR
CLEANING PURPOSES, WE RECOMMEND TO MAKE
SURE THAT ALL PARTS ARE CORRECTLY POSITIONED
BEFORE IGNITING THE BURNERS AGAIN. AFTER A
POSSIBLE GRID REMOVAL FOR CLEANING AND/OR
MAINTENANCE NEEDS, WE RECOMMEND TO VERIFY
THE PRESENCE OF SUCH RUBBER PADS AND TO PUT
THE GRIDS BACK IN
THEIR STABLE AND
CENTRED CORRECT PO-
SITION.
Incorrecto
Correcto
Publicidad
Tabla de contenido
