IO Mabe IO6004I PM02 Manual De Instrucciones página 34

4
instrucciones para la instalación:
steel or enamelled plate hobs
• Position the special sealed gasket (provided)
on the edge of the hob making sure that the
ends meet without one lying on top of the
other.
• Put the hob in the unit opening making
sure that it is centred.
• Fasten the hob to the unit with the fastening
brackets. The traction of the screws will be
enough to cut the sealing gasket so that the
excess can easily be removed.
glass hobs
• (Only for 71 cm tops) Position the two
aluminium strips (supplied) along the side
edges of the hole (470 mm).
• Position the special sealed gasket
(supplied) on the edge of the hob making
sure that the ends meet without one lying
on top of the other.
• Put the hob in the unit opening making
sure that it is centred.
• Fasten the hob to the unit with the
fastening brackets.
warnings
If there is a hanging unit over the
cooking hob it must be at least 600 mm
away from it.
In order to avoid excessive overheating,
even if there is no oven below, it is
necessary to provide a separating
space having at least the size of the
embedment hole.