Memorizing The Channels - Samsung 4 450 Serie Manual Del Usuario

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the Ch< or Ch> button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding or deleting channels (Channel Manager).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENtER
2. P ress the ENtER
button. Repeatedly press the ▲ or ▼ button to cycle through
these choices: "Air", "STD", "HRC", or "IRC" (all cable TV).
Press the ENtER button.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
At this point, the signal source has been selected.
Storing Channels in Memory (Automatic Method)
1. First, select the correct signal source (Air, STD, HRC, or IRC).
2. Press the ▲ or ▼ button to select "Auto Program", then press the ENtER
3. Press the ENtER
button to select "Start".
The TV will begin memorizing all of the available channels.
The TV automatically cycles through all of the available channels and stores
them in memory. This takes about one to two minutes. Press the ENtER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
4. A fter all the available channels are stored, the "Channel" menu reappears.
Press the ExIt button to exit.
To stop the search before it has finished, press the ENtER
selected.
button.
button.
button with "Stop"
English - 22
tV Channel
Air / Cable : Air
Auto Program
Channel Manager
fine tune
Color System : Auto
Move Enter
tV Channel
Air / Cable : Air
AIR
Auto Program
StD
Channel Manager
hRC
fine tune
IRC
Color System : Auto
Move Enter
tV Channel
Air / Cable : Air
Auto Program
Channel Manager
fine tune
Color System : Auto
Move Enter
Auto Program
Air
Stop
Enter Return
►
►
►
►
►
Return
Return
►
►
►
►
►
Return
40