Bulb Replacement - Kenmore 415.23665310 Manual De Uso

Grill Halogen Light
LIGHT OPERATION INSTRUCTIONS
1. Make sure light switch on the control panel is in the "OFF" position
2. Connect light plug to an extension cord, then put the extension
cord plug into the outlet on the wall.
3. Turn the light switch to "ON"
WARNING
Keep any electrical supply cord away from any
heated surface.
Use the shortest length extension cord required.
Do not connect 2 or more extension cords together.

Bulb Replacement

▲
Make sure light switch on the control panel is in the "OFF" position and adapter plug is disconnected from outlet.
Step 1
Release the screw securing the light
socket.
Step 4
Pull out the bulb and replace
with a new bulb.
16 • 464225913
Step 2
Take out the socket and remove the lens.
Step 5
Reverse instructions from step 3
through step 1 to re-install socket.
CAUTION
Take care not to touch the bulb with your bare fingers.
Touching bulb with your skin can leave a film on the
bulb that causes it to burn out quickly.
2.
1.
ON
OFF
Light plug
Step 3
Loosen the two screws which are
locking the bulb.
Remark: skip step 3 if there is no screw
locking the bulb.
3.
ON
OFF
Extension cord,
for out door use
Bulb Specification
Bulb Type: Halogen
Wattage: 10 W per bulb
Voltage: 12 V
Continued on next page