ARENDO PRIMEWATER 300908 Manual Del Usuario página 27

4 Initial start-up
Please remove the kettle and the heating element from the packing and clean the
unit with a damp cloth. Afterwards connect the kettle only to a properly installed
grounded socket. Before regular use, fill the water reservoir with cold water to its
maximum level and boil according the following instructions. Thereafter discard
the water in order to remove any residues of the production process.
5 Handling
Press the opening button to open the cover. Then fill the Arendo kettle with cold
water and close the cover by pressing down the cover until it locks.
Important note: Please make sure not to fill in more than the maximum level of 1,7
l as marked on the scale, which is located on the right inner side.Place the kettle
on to the bottom heating and set the On/Off button downwards to heat the water.
As soon as the target temperature has been reached, the kettle will automatically
turn off.
6 Decaling and cleaning
We recommend decalcifying the kettle in regular intervals, depending on the in-
tensity of use. Before cleaning, it is essential to remove the power plug from the
socket and wait until the device is completely cooled down. The scale filter is locat-
ed prior to the spout. To remove the filter, open the cover and push the plastic flap
downwards. Then deep clean the taken filter with warm water and insert it into
the holder again. When inserting the filter, take care that the retaining lug is fixed
to the guide rail. Only use conventional decaling agents based on citric acid. Please
follow the manufacturer´s instructions for dosing the respective product you have
chosen. The heating element must not be cleaned and never be processed with
sharp or hard objects. For cleaning the outer surface of the kettle, only use a damp
cloth. Never use hard or abrasive objects like a wire brush or a steel-sponge for
cleaning. Please do not use any aggressive cleaning agents which could be harmful
for human consumption or damage the surface.
52
7 Safety instructions and disclaimer
Do not attempt to service this product by yourself as opening or removing covers
may result in fire, electric shock or equipment damage. The kettle is only discon-
nected from the voltage system when the plug has been removed from the socket.
Please avoid any contact to the electric current. Pull out the plug before lightning
storms or if you do not regularly use this product, to prevent a short- circuit. This
device is only licensed for indoor use and dry areas. Please protect it from water,
rain, snow or high humidity and keep it away from high temperatures and direct
sunlight. Do not expose this product to extreme and sudden changes of temper-
ature or heavy vibrations; this may lead to damage of the internal electronic part
of this unit. Check kettle for signs of damage before putting it in operation. In case
the device received any damage, it should not be used. Please contact our custom-
er support.Please observe the relevant national provisions and legal restrictions.
Do not use the device for anything other than intended and as described in the
manual. Any attempt of repairs or alterations by someone other than the original
supplier will invalidate the guarantee and result in refusal of warranty claims. The
machine may only be used by persons who are familiar with the operating manual
and the applicable regulations concerning working safety and accident prevention.
This device is not intended to be used by persons (including children) with limited
physical, sensory or mental aptitude or lack of experience and/or knowledge un-
less they are supervised by a person responsible for their safety or have received
instructions as to how the device is used properly. The technical specifications of
this product may change without prior notice.
English English 53