LF Garden Treasures F180102 Manual Del Usario página 7

ASSEMBLY INSTRUCTIONS
3. Remove the fixture fastener (C) from the firepit. Attach the firepit by aligning the post through the
umbrella hole, then tighten the fixture fastener (C) clockwise (see Figure 2).
umbrella hole
4. Insert 2 pcs glass (B) into the groove of the clip (AA), then tighten the bolts using Hex
screwdriver (BB) (see Figure 3).
Hardware Used
AA
Clip
BB
Hex screwdriver
5.
glass are in an upward direction, tighten the bolts using Hex screwdriver (BB) (see Figure 4).
Hardware Used
BB
Hex screwdriver
control knob
post
C
Figure 2
x 4
x 1
x 1
7
Figure 1
AA
Figure 3
Figure 4
B
B
AA