LF Garden Treasures F180102 Manual Del Usario página 9

ASSEMBLY INSTRUCTIONS
8. Place the glass beads (D) into the fire pit body (A). Approx. 3.08 lbs of glass beads are
required (see Figure 9).
OPERATING INSTRUCTIONS
Checking for leaks
WARNING:
Before using this outdoor fire pit, make sure you have read,
understand and are following all information provided in the
"Safety Information" section beginning on page 2 and 3.
Failure to follow those instructions can cause death, serious
injury or property damage.
Burner connections
1. Make sure the valve connections are securely fastened to the burner and
the cylinder.
2. Visually check the connection between the burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the orifice.
4. Please refer to diagram for proper installation (see Figure 10).
5. If the burner/venturi tube does not rest flush to the orifice as shown, please
contact us for assistance.
WARNING:
Failure to inspect this connection or follow these instructions
could cause a fire or an explosion which can cause death,
serious bodily injury or damage to property.
A
9
D
Figure 9
Figure 10