GE JVM1665 Manual Del Usario página 31

Problem
Food browns on top
much faster than
on the bottom
Oven temperature
fluctuates during
cooking
Vent fan comes on
automatically
SENSOR ERROR appears
on the display
Possible Causes
Rack has been placed
in the "high" position.
The cooking element cycles
on and off to maintain
the oven temperature
at the desired setting.
The vent fan automatically turns • This is normal.
on to protect the microwave if it
senses too much heat rising from
the cooktop below.
When using a Sensor feature,
the door was opened before
steam could be detected.
Steam was not detected in
a maximum amount of time.
What To Do
• Always use the rack in its "low" position.
• This is normal.
• Do not open door until steam is sensed and time
is shown counting down on the display.
• Use Time Cook to heat for more time.
ge.com
31