Replacing The Light Bulb - GE JVM1665 Manual Del Usario

Replacing the light bulb.

Bulb
Remove screw.
Cooktop Light/Nite Light
Replace with a 12 volt, 10 watt (max.)
halogen bulb. Order from your GE supplier.
1 To replace the light, first disconnect
the power at the main fuse or circuit
breaker panel or pull the plug.
2
Remove the screw from the light
compartment cover and lower
the cover until it stops.
3 Be sure the bulb is cool before removing.
Pull gently to remove bulb.
4 Put the new bulb in place and push
gently. Raise the light cover and replace
the screw. Connect electrical power
to the oven.
ge.com
27