Descargar Imprimir esta página

Pontiac Bonneville 1987-1993 - Metra Electronics INST-4544 Instrucciones De Uso Y De Instalacion

Publicidad

Idiomas disponibles

Idiomas disponibles

Oldsmobile Toronado
1982-1985
1. Depress the clip located behind the headlight
knob and remove the knob.
2. Remove (3) screws securing the steering column
trim and remove.
3. Remove (4) screws from the bottom edge of the
dash trim bezel and remove. (Figure A)
4. Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
5. Remove and retain the brackets.
Continue to kit assembly
(S-10 application
shown as example)
(Figure A)
(Figure B)
Dash Disassembly 99-4544
Pontiac 6000
1982-1991
1. Open the glove box and remove (1) screw from the
side of the radio trim bezel. (Figure A)
2. Gently remove the bezel from the dash and the
dummy plate from the bezel.
3. Cut and remove all mounting tabs on Bracket #5
EXCEPT tabs "A". (Figure A)
Note: Identify mounting tabs by the stamped letter
on the back of each tab.
Continue to kit assembly
"A"
(Figure A)
(Figure B)
23
Pontiac Bonneville
1987-1993
1. Gently unsnap and remove the dash trim bezel.
(Figure A)
2. Remove the screws securing the factory radio and
disconnect the wiring.
3. Remove the hardware securing the factory
mounting brackets to the factory radio.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
"A"
(Figure A)
(S-10 application
shown as example)
(Figure B)

Publicidad

Capítulos

loading