Metra Electronics INST-4544 Instrucciones De Uso Y De Instalacion página 29

Side mounting brackets:
Secure the mounting brackets to the radio housing
(through the center holes) with (2) carriage bolts
and (2) keps nuts or studs and nuts. (Figure D)
Note: If your vehicle requires bracket set #9 or
#10, you must insert the (2) carriage bolts from the
outside of the housing instead.
(Figure D)
Kit Assembly 99-4544
All Vehicles
4. (1) Slide the DIN cage into the radio housing and
secure by bending the metal locking tabs down.
(2) Slide the aftermarket radio into the cage until
secure. (Figure E)
5. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
(Figure E)
29
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the radio for
proper operation.
6. Reassemble dash in reverse order of disassembly
using screws previously removed. (Figure F)
(Figure F)