How To Use; Getting Started; Program Guide - Black and Decker HFD2000B Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO USE

This product is for household use only.

GETTING STARTED

Remove all packing material, any stickers, and the plastic band around
the power plug.
Remove and save literature.
Wash all removable parts as instructed in Care & Cleaning Section.
Select a location where this unit is to be used, allowing enough space
from the back of the unit and wall to allow heat flow without damage to
cabinets and walls.
BEFORE USING FOR THE FIRST TIME
Hand wash the removable parts. Rinse then dry thoroughly.
The new heating element may smoke a little during the first use as it burns
off residual oil from the manufacturing process. This may cause small
amounts of smoke or odor but it's normal and nothing to worry about.
Ensure the room is well ventilated.
DISPLAY
During use, the display alternates between showing the current temperature
and the default program time for the currently selected program. If a
program is already running, the display will show the remaining program run
time. When the temperature is displayed, the temperature button ( ) will light
up. When the time is displayed, the time button (

PROGRAM GUIDE

You can change the default program temperature and program run time.
Program
Air Fry
Roast/Bake
Grill
Rotisserie
To select a program, press the relevant button shown above.
To change the temperature, first tap the temperature button ( ) then use the
up (
) and down (
To change the program run time, first tap the time button (
up (
) and down (
Default Settings
Temp. °F
Minutes
425°F
350°F
375°F
375°F
) arrows to select the desired temperature.
) arrows to select the desired time.
) will light up.
Adjustable Range
Temp. °F
30
300 - 425°F
30
200 - 425°F
15
200 - 425°F
30
250 - 425°F
5
Minutes
1 - 60
1 - 60
1 - 60
1 - 60
) then use the

Publicidad

Tabla de contenido
loading

Tabla de contenido