Display And Buttons; Screw Down Crown - Seiko V175 Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74

DISPLAY AND BUTTONS

STOPWATCH 1/5-second hand
Hour hand
Small second hand
STOPWATCH minute hand
Some models may have a screw-lock-type crown. If your watch does, refer to the
"SCREW DOWN CROWN" section on the next page.
Simplified illustrations may be used in the following sections of this manual.
8
Minute hand
A
24-hour hand
CROWN
a
b
c
a: Normal position
(after the crown is released)
B
b: First click
c: Second click
Date

SCREW DOWN CROWN

Your watch has a screw down crown to prevent accidental operation and help
maintain water-resistant quality.
To use the crown, it is necessary to unlock the crown first before pulling it out,
and it is important to securely screw the crown in after each use.
HOW TO OPERATE THE SCREW DOWN CROWN
The crown must be securely locked in the case except when you use it to set the watch.
<How to unlock the crown>
Turn the crown counterclockwise to unscrew it.
The crown is released and projected outward
from its original position.
<How to lock the crown>
Turn the crown clockwise while pressing it to
the case until it is screwed all the way in and
locked.
1. Before diving, make sure that the crown is locked tightly in place.
2. Do not operate the crown when the watch is wet or in water.
3. When screwing the crown in, ensure that the crown is correctly aligned and turn it
gently. If it is hard to turn, unscrew it first, and then rewind it. Do not screw it in by
force as it may damage the thread of the screw or the case.
The crown is unlocked
and can be pulled out.
The crown is locked.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido