Dash Disassembly - Metra 99-5831 Instrucciones De Instalación

1. Remove the top panel above the
display. (Figure A)
2. Remove (2) T-15 Torx screws
above the display/radio panel.
(Figure B)
3. Unplug and remove the display/
radio panel. (Figure C)

Dash Disassembly

(Figure A)
(Figure B)
99-5831
4. Remove the A/C vents and hazard
switch from the panel and set
aside for kit assembly.
5. Remove (2) T-20 Torx screws
from the top of the radio, and then
unplug and remove from the dash
cavity. (Figure D)
Continue to kit assembly.
2
(Figure C)
(Figure D)