ClearSounds Talk500 V508 Manual Del Usario página 13

Release the button when you are finished or the unit will stop
recording after 3 seconds. The new voice prompt will then be
played automatically. Note: To delete the voice prompt recorded,
press DELETE button while the voice prompt is playing.
5. Repeat step 3 to 4 to edit or delete more entries or exit the set-
up mode by pressing the
1. press and release
2. Select the required location from the phone book by pressing
3. press and hold MENU button for two seconds. The display will
show EDIT?
4. press DIAL button, the first digit of the selected phone number
will flash.
5. You can move the cursor to the required position by pressing
. To delete the digit, press DELETE button, or press any numeric
key to inset the digit and confirm with DIAL button. Then the
display shows the flashing first letter of the name.
6. Move the cursor to the required position by pressing
delete the letter, press DELETE button, or press any numeric key
to replace the name, and confirm with DIAL button, "SAVED!" is
shown.
7. You can repeat step 2 to 6 to edit more numbers or press
To Delete the phonebook Memory
1. press and release
2. Select the required location from the phone book by pressing
.
3. To delete single memory, press DELETE button once. The display
will show the DELETE?. press DELETE button for 2 seconds. The
telephone number and name will be deleted and the display will
now show another number from the phone book.
To delete all entire memory, press and hold DELETE button until
the display shows DELETE ALL?. press DELETE button for 2 seconds
until EMpTY appears on the display.
Storing Numbers In The MEMoRY Button
This telephone has 3 one-Touch memories numbered M1, M2 and M3.
once a number has been stored in a memory location, you only need
to press one button to make the call.
To Edit The phonebook Memory
button,
button,
button.
icon is shown.
icon is shown.
13 – ENGLISH
or .
or
or . To
to exit.
or