ClearSounds Talk500 V508 Manual Del Usario página 8

1. The ringer sound level can be adjusted by sliding the RINGER
switch to select HI, MID and Lo level.
2. The red bright LED will flash with all incoming calls.
Setting The Handset Volume Control
The Boost LED is used to reflect the handset extra volume setting.
press the +40dB button, the Boost LED will turn oN.
1. Increase the handset volume by rotating the
listening level (level 1 to level 9).
2. During the conversation, you may turn oFF the Boost by pressing
the +40dB button, the Boost LED will turn oFF and the sound
level will return to normal.
When you hang up, the phone will reset to normal sound level.
Note: Choose not to press the +40dB button and the Boost LED will
remain oFF. This is the setting to use for people who do not require
the level of amplification and tone control offered on the phone.
Setting Tone Control (ToNE HI/Lo)
The Tone control allows you to fit your specific hearing needs, so
words are clearer and easier to understand. Slide the Tone control
DOWN to boost the lower frequency range. Slide the Tone control Up
to boost the high frequency range. Note: The tone control function
will not be effective when the Boost LED is oFF.
You can adjust the speaker volume for a more comfortable listening
level by sliding the VoLUME HI/Lo switch.
1. pick up the handset or press
and wait for a dial tone.
2. press the keypad for the telephone number you wish to dial. The
display will show the number that you dialed on the keypad. If
you dial a number over 14 digits long, it will show the last 14
digits only.
3. When you have completed your call, hang up the handset or press
button again to release the telephone line.
Setting Ringer Volume Control
Setting Speaker Volume Control
Dialing A Call
button (the speaker LED will light)
8 – ENGLISH
knob to select the