KTM Power Parts 76014937044 Manual Del Usuario página 5

4
1
1
3
6
5
8
7
9
Scope of supply:
2x LED turn signals, front right/rear left (1)
2x LED turn signals, front left/rear right (2)
2
1x adapter cable (3)
1x turn signal relay (4)
2
The ignition must be switched off during installation.
NOTE:
A label is found on the underside of the turn signal. It provides information
on the installation position.
FRONT LH: Installation at front left
FRONT RH: Installation at front right
REAR LH: Installation at rear left
REAR RH: Installation at rear right
Assembly
- Remove the headlight mask (5) (see the Owner's Manual).
- Remove the original turn signals (6) at the front on both sides.
- Mount the LED turn signals at the front on both sides.
- Remove the original turn signal relay (7) with the plate (8).
- Detach the connector of the original turn signal relay (9).
76014026000
76014025000
76011025000
76011030000
5