Internal Blower Installation - Faber HILTIS36WHNB Instrucciones De Instalación Información De Uso Y Cuidado

INTERNAL BLOWER INSTALLATION

lf you use the internal blower kit, IB600 kit or IB400 kit or IB300 kit, please throw away the the flange
(3B) and the cable (4B), given with the internal blower kit, shown on page 10 and use only 10" Flange.
Separate Box and Range Hood
1
Unfasten the 4 screws to dismount the
Box for the blower.
Torx Screwdriver
3
The blower can be positioned in four different venting directions as shown.
Rotate the Box with Blower in the correct position.
Right
Choose the Box position (Left-Right-Back-Front)
Left
Attach the Internal Blower
2
Position Internal Blower as shown into the
removed Blower Box. Secure the Internal
Blower in the Blower Box with the two screws
provided with the Internal Blower.
Phillips Screwdriver
Back
Front
15